• Series BD
  • Univer Valves
  • ISO 15407-1/2 Valves and Solenoid Valves, 18-26mm; 5/2, 5/3, and 3/2
Acetalic resin, die-cast zamac
Body
145 psi (max.)
Operating Pressure
Filtered air 50µm, neutral gas
Fluid

About Univer Series BD

ISO 15407-1/2 Valves and Solenoid Valves, 18-26mm; 5/2, 5/3, and 3/2

Spool system valves and solenoid valves, ranging from 18 to 26mm, in accordance with ISO 15407-2 or VDMA 24563/ISO 15407-1 specifications. These establish the dimensions of the bearing surface and the minimum distance between two valve places, guaranteeing interchangeability and allowing the addition of any other valve (providing it complies with particular specification). VDMA 24563/ISO 15407-1 is a pneumatic coupling standard between valve and sub-base, and ISO 15407-2 is an electric coupling standard between valve and sub-base.

Additional Information

Ordering Information
To obtain more detailed product specifications, in addition to ordering information and model build codes specific to Univer® Series BD, please refer to the PDF datasheet below.
DatasheetSeries BD (9.8 MB)
Technical Characteristics
Body: Acetalic resin, die-cast zamac
Operating Pressure: 145 psi (max.)
Fluid: Filtered air 50µm, neutral gas
Fluid temperature: 122°F (max.)
Ambient temperature: 4-122°F
Switching system: Spool
Valve function: 5/2, 5/3, 3/2
Seals: Nitrile rubber
Control: Indirect electro-pneumatic and pneumatic
Return: Mechanical or pneumatic spring
Voltage: 24 Vdc/2.5 W or 12 Vdc/2.5 W
Protection: IP65
Coil: Series DD